THE BEAST — LEFT SIDE · FRAME — sketch bodies at measured positions

Approved Sketch topology (sheet 1 of 4) joined to the Configurator's human-placed anchors via Recognition's declared tag_map (5 rows, exact lookup, refusals kept refused) · pump train at the west end, E-101 centre, C-101 + V-110 on the east utility side, panel mid-machine — that is what the measurement says
FRAME — components stand where the machine was measured; 3 bodies wear measured sizes, 2 are envelope-bounded, the rest follows the pipework. Nothing here is photoreal.
Legendclick a row to highlight
Measured anchor ✓ (4)
Measured, NOT confirmed (1)
Equipment
Valve bodies
Handwheels / levers
Relief (PSV)
Piping (re-routed)
Instruments / signal
Frame / supports
Off-sheet connections
A ring under a part = its position was measured (anchor on the scanned twin). No ring = the part follows its pipe run; its position is topology, not measurement.
Sizes: P-101 / C-101 / E-101 are MEASURED (photo pass); V-110 and the panel are envelope-BOUNDED, not measured; all else is the drawing's invention. Pipes drawn at 0.65× invented dia (indicative).
5 of 17 P&ID parts stand at measured positions — source: 14 human-placed anchors, 13 confirmed ✓ (the control panel anchor was dragged, never confirmed — moving alone is not approval) · 12 parts follow the re-routed pipework (topology, not measurement) · 17 sheet connections kept, 0 refused
cross-source agreement: mean 0.199 m over the 3 located parts that also exist in Recognition's mirror snapshot (P-101 0.434, C-101 0.024, E-101 0.140 m) — two independent passes over the same machine, neither ground truth
scale: every metre rests on a TYPED 1.95 m long axis — 1.95 is also the system's silent default when no scale was set, so "typed" and "never set" are indistinguishable here
sizes: 3 bodies MEASURED (Recognition photo pass — P-101 0.165, C-101 0.363, E-101 0.147 m, each ±2%) · 2 BOUNDED by the envelope, not measured (V-110 stands on the deck, mid-height on its anchor; panel top at the 1.157 m envelope top — no measured size exists for either) · the other 12 bodies keep the drawing's invented sizes · pipe runs drawn at 0.65× the invented diameters (one stated factor, indicative only — no bore claimed)
?
×

Shape library — FRAME

Bodies are the approved Sketch's inventions (the sheet prints no sizes — its Note 2). What is NEW at this rung is position: five parts stand where the machine was measured; the other twelve follow the re-routed pipework. Counts are from this model's 83 nodes.
Anchor ring (measured)annulus on the deckA flat ring on the deck under each part whose position is MEASURED: the human dragged an anchor onto the scanned twin and clicked ✓. Blue = confirmed (P-101, C-101, E-101, V-110). Amber = dragged but never confirmed (the control panel). Everything without a ring stands where the pipework logic puts it, not where anything was measured.
5 rings — 4 blue ✓ + 1 amber
Routed pipepipe_runA polyline swept as cylinders with a sphere at every bend, RE-ROUTED between the measured positions. Every connection the sheet draws is kept; 0 runs refused. Drawn at 0.65× the sketch's invented diameters (one stated factor) so runs read against the measured bodies — indicative only; no bore is claimed.
16 runs — suction, discharge, recirc, sample, air, drains
Valve bodyvalve_bodyBowtie body, typed from the DRAWN symbol per the sheet's own legend. These are the topology-placed parts: each stands ON its pipe run between located equipment and moved WITH the run when the run was re-routed.
6 bodies — HV-101/102/103/111, sample ball, CV-101
Handwheel / leverhandwheel, lever_handleRed ring with crossed spokes; a quarter-turn lever for the ball sample valve.
5 — one per hand valve
Relief valverelief_valveAngle pattern on V-110's top head, riding at the receiver's MEASURED height.
1 — PSV-110 (+ vent tail)
Vessels & machinespump_body, exchanger, vessel_vertical, compressorFive bodies stand at the Configurator's anchors. THREE wear a MEASURED size (P-101 0.165, C-101 0.363, E-101 0.147 m — recipe shape kept, scaled to Recognition's measurement). V-110 and the panel have NO measured size and are BOUNDED by the envelope instead (V-110 on the deck, panel top at the envelope top) — a bound, not a measurement. M-101 keeps its invented 0.30 m barrel and dwarfs its measured pump: drawn, not hidden. E-101's saddles are dropped — a 0.15 m body at its measured 0.48 m height is pipe-borne, as the photographs show.
P-101/M-101, C-101, E-101 (?), V-110, F-101 (?), panel
Instrumentsinstr_stem + instr_gaugePI-102/PI-101 ride the discharge jog leg (downstream of HV-102, as drawn); PI-110 rides V-110's shell. PI-101 keeps the sheet's one signal line to the panel.
3 gauges — PI-101, PI-102, PI-110
Frame & sitechannel frame, stanchions, boundary_markerThe frame is drawn at the MEASURED footprint 1.95 x 0.63 m (scan bbox; scale basis: typed 1.95 m — see the caveat in the score panel). Green cones where lines leave this section. Pipe supports re-derived for the new routes.
4 off-sheet arrows
Join: Recognition's own connections.tag_map — 5 declared rows, exact lookup only. The 11 tags its _unmapped_note refuses stay refused; no fuzzy matching anywhere.